There’s a great deal of information online concerning when you are having trouble with your car’s power locks . Assessing such things may require removing the inside car door panel to take a closer look. Fixing car door issues doesn’t have to be scary; removing the inside car door panel is just part of the process. Here’s a brief summary of WikiHow’s step-by-step take on the process. For this undertaking, you’ll want to have a flathead, Phillips and 12-point screwdriver handy. You may also need an Allen wrench. Look into your car’s owner’s manual before proceeding, of course. A web search involving diagrams won’t hurt, either.
Get that door open before proceeding
You can’t do this job effectively if you do not have room to work. Furthermore, without the proper angle, you’ll have to make use of unadvisable force to do the job.
Have to spring that pop-up lock?
That is, does your lock extend from out of the top of the inner door panel? If such is the case, removal is necessary at this point. Luckily, they generally unscrew in a simply manner.
Level with your lever
Next, find the door deal with and contemplate its removal. A fastening screw should be located somewhere underneath the handle. Lift up the lever and the screw should be nearby. After unscrewing, the plastic mounting plate that held the handle should be removable.
Get the armrest now
Look under the armrest. That’s typically where the armrest screws can be located. Plastic covers could possibly be hiding the screws, but your flathead screwdriver could be used to pry those off. Take the screws and remove that armrest. One additional step would be unplugging the wires for those who have power windows. You do not have to be an electrician, as there are plugs. All you have to do is squeeze the plastic and the wires will come out.
Window cranks? Yeah, if they’re manual
You may have to remove a plastic case and a snap ring from the base of the crank. The flathead screwdriver is yet again the tool for the job.
Break out the putty knife
The putty knife is a fantastic tool to wedge between the plastic frame for separation. Be gentle when prying things apart, because you don’t want to snap the plastic grommets that attach the door to the inner cardboard plate. Don’t Incredible Hulk this part; you’ll want to keep using those grommets, unless you are itching to scour eBay. You’re almost done, but do not go for total separation until completing the next step.
Lift the window out of its slot
The window must come out before removing the panel, or it could fall out and shatter. Once you’ve accomplished this, pop, pop away. Take care of your repair issues, then follow the above process in reverse order. Lock and armrest are done last. That panel should have some form of adhesive around the outer edge to help it stay in place, rather than hang.
Citations
Read more here
http://www.wikihow.com/Remove-an-Inside-Door-Panel-from-a-Car
